CDC 600K 600m Water Well Drilling Rig Truck
Product Description
SINOTRUK HOWO 6X6 water well drilling truck
Advantages:
1. Simple structure, low cost
2. Easy maintenance
3. Mechanical transmission, small power loss, maximum transmission efficiency of power source
4. Lower requirements for operator level
5. Lower requirements for use environment
Product scope of application
1. Drinking water for residents and livestock
2. Field irrigation
3.Drilling water well.
4.Development of water for industrial production
5. Mine ventilation hole,the well that drops the water level.
6. Oil field exploration
7. Geothermal well drilling
8. road construction foundation pile
9. Geological exploration
10. hydrogeological investigation
Details photos for reference
Specifications:
CDC-600K Water Well Drilling Rig | ||||
Comprehensive overview | ||||
Depth: 600M Aperture: 500 MM Dimensions:12000mm×2550mm×4300mm Total Weight: 32000kgs Drilling technology can be used: mud positive circulation, DTH-hammer, air lift reverse circulation, Mud DTH-hammer. | ||||
A. CHASSIS | ||||
Code | Name | Parameter | Remarks | |
| A01 | Truck chassis | SINOTRUK HOWO 6X6 Cargo Chassis Model: ZZ2257N5857C Cabin: HW76 Standard cab with one sleeper With AC Engine: WD615.96C,380hp, Euro III emission standard Rate speed: 2000rpm Wheelbase: 5800+1400(mm) Gear Box: HW19710 10 Forwards 2 Reverse Steering: ZF Front axle: Loading capacity: 9000KG Rear axle: Loading capacity: 16000KG×2 Tyre: 12.00R20, in total 11 pieces with one spare tire With PTO Fuel tank: 400L Overall size: 12500*2500*4300 Tare weight: 32000kgs | ||
1. Feed System (Pull Down Cylinder) | ||||
Make & model: CTS &COMMAND MACHINE Feed cylinder size: ø rod x ø cylinder x stroke: 125mm*95mm*4500mm. Type of design (two piston rods or one rod): TWO Min. drilling head traveling stroke (m): 9m Min. Pull up chain strength in tension: 154,000kg Min. Pull down chain strength in tension: 100,000 Kg Min. Pull up capacity (kg): 40,000 kg Min. Pull down capacity (kg): 30,000 kg Pull up speed - slow (mpm): ~ 6 Pull up speed - rapid (mpm): ~ 53 Pull down speed - slow (mpm): ~ 5 Pull down speed - rapid (mpm): ~ 37 Feed system is chain type and supported by roller |
| |
2. Leveling Jacks Make & model: CZT- 1& COMMAND MACHINE] Leveling Jack Cylinder Size: ø rod x ø cylinder x stroke (mm) Min. Lifting capacity of each jack (kg): 30,000 Min. Ground clearance (mm): 750 |
| |
3. Top Head Rotary Gear Box (Drill Head) Make & model: CD-6 &COMMAND MACHINE] Reduction ratio: 21:56 Top drive spindle bore (mm): [63MM] Min. spindle pull up capacity (kg): 40,000 kg Spindle speed range (rpm): Low speed range & (Min. torque - kg-m): 0-60 & 2000 kg-m High speed range & (Min. torque - kg-m): 60 – 120 & 900 kg-m | ||
4. Deck Engine Make and model cummins QSX15-C600 Engine Hp and rpm: 600HP and 1800 rpm | ||
5. Mud Pump Make & model: BW1000/6 &COMMAND MACHINE Piston diameter and stroke (in): 4 inch Min. discharge capacity (l/min): 2000 Min. Working pressure (psi): 880 Suction and delivery valve type: 3 inch | ||
6. Mast Min. Gross nominal capacity (kg): 60,000 kg Maximum hook load capacity (kg): 50,000 kg Mast Length, width & depth (mm): 14000mm *1200mm*1000mm] Min. over all height from the ground up to top of the mast (m): 12m | |
7. Main Hoist Make & model: [YSD-4 &COMMAND MACHINE] Wire rope diameter (mm) & length (m): ø16 x 75 Min. hoisting capacity (kg): 40,000 Minimum hoisting speed (m/min):45 | |
8. Power Torque Make & model: [CXK-6 & COMMAND MACHINE] Min. loading capacity (kg): 40,000 kg Min. break out torque (kg-m): 600 | |
9. Water/ Foam Injection Pump Make & model: CPM-3 &COMMAND MACHINE Piston diameter and stroke (in): 90 L/min Min. discharge capacity (l/min): 90 Min. Working pressure bar: 40 BAR Suction and delivery valve type: 1 inch | |
10.Hammer Oil Pump Make & model:CCD3 &COMMAND MACHINE discharge capacity (l/min) 80L/MIN Min. Working pressure bar 3MPA | |
11.Auxiliary Hoist Make & model: CJY-3 & COMMAND MACHINE Wire rope diameter (mm) & length (m): ø10 x 100 Min. hoisting capacity (kg): 3000 Minimum hoisting speed (m/min): 45 | |
12.Hydraulic Welding Machine Hydraulic motor and welding machine make & model: BM5- 100& TJPC The welding unit shall be mounted on the rig carrier truck. It shall be driven by hydraulic motor. Welding machine shall be used for ø 2.5 – 4 mm electrodes. The output (V & I) shall be appropriate to the above size electrodes. |
13.External Hydraulic System Hydraulic pump make & model: GPC4-50 &TJPC] | |
14. Rig Electrical Systems Electrical equipments make and model: GPC4-50 is the model and Brand: 24V and &FENGFAN Max. circuit flow: (13gpm & 2700 rpm) | |
15. Night Operation (Drilling Light) Lights, lines and controls make and model: [Special LED lamp for construction machinery(100W), BRAND: HUAREN] | |
16. Cooling System Radiator and cooling system make and model: [Electric fan and diesel fan] | |
17. Instrumentation and Controls All type of controls on control panel for engine, hydraulic system control valves (directional, flow and pressure) compressor, mud pump, foam pump, winches etc shall be stated their make and model. | |
18.Safety Equipment Manufacturer standard safety equipment to be used by the drilling Crew during operation:- Safety helmet complete with ear defender Safety eye glass Safety Boot (sizes to be agreed) Leather Gloves Rain coats First aid kits Control panel shall have a cover to protect the driller from mud splash, etc. Rig carrier truck shall have a ladder minimum at two opposite side and rubber on top of the truck cover at certain areas for safety of workers on the machine. | |
19. Trailer Air Compressor (Additional compressor other than the one mounted on the deck) Make and model of compressor 298SCY &ZEGA Type of system: Screw Number of compression stages: 2 Max. Unloading pressure (psi): 380 Min. Nominal working pressure (psi): 350 Min. free air delivery (cfm) 1100 cfm | |
20. COMPRESSOR ON TRUCK CHASSIS Model ：CMDK- 1250 and Make is COMMAND MACHINARY Discharge pressure ：30BAR Discharge volume ： 1250 CFM Cooling mode : Wind cooler Intake temperature ：- 10℃-40℃ Outlet air oil content：≤5PPM Unit weight：4700 KGS, noise:≤97DB(A). OUT SIZE:1×2" 1×3/4" Outline size:3400×1950×1830 Lubricating oil quantity: 125L | |
21. Air compressor and mud pipeline system Model ：CMD-2-6 Make is COMMAND MACHINARY Air DTH hammer drilling and mud pump drilling can be switched instantly Maximum pressure: 40MPa | |
| 22. Drill pipe lifterModel ：CMD-5-68 Make is COMMAND MACHINARY Maximum lifting weight: 50t Quick loading and unloading of drill pipe | |
| 23. Pipe unloading cylinder Model ：CMD-8-3 Make is COMMAND MACHINARY Remove the first buckle of drill pipe | |
| 24. Drill pipe Model ：CMP-1 Make is COMMAND MACHINARY 4 ¾ " x 6m Drill pipe material: R780 Joint material: 35CrMo | |
| 25. Stabilizer Model ：CMD-22-8 Make is COMMAND MACHINARY Used to straighten the drill pipe in the hole | |
| 26. Wrench spanner Model ：CMP-22-15 Make is COMMAND MACHINARY | |
| 27. Cross over sub Model ：CMD-23-36 Make is COMMAND MACHINARY Joint material: 35CrMo | |
| 28. Tungsten carbide roller bit Model ：CMD-36-12 Make is COMMAND MACHINARY For hard rock formations | |
| 29. Clay bit Model ：CMD-45-12 Make is COMMAND MACHINARY For soft formation | |
| 30. Impactor Model ：CMD-78 Make is COMMAND MACHINARY | |
| 31. Button bit domed inserted Model ：CMD-66 Make is COMMAND MACHINARY | |
| 32. Casing elevators Model ：CMD-17-9 Make is COMMAND MACHINARY | |
| 33. Mud Mixer Model ：CMD-18-21 Make is COMMAND MACHINARY Mixed mud Flow: 2000L / min | |
| 34. Fishing tools Model ：CMD-1133-21 Make is COMMAND MACHINARY | |
35. Chain tongue Model ：CMD-1200-21 Make is COMMAND MACHINARY | |
36. Tooling box Model ：CMD-1255-21 Make is COMMAND MACHINARY | |
37. Oiler jet type Model ：CMD-1255-22 Make is COMMAND MACHINARY | |
| 38. Tent Model ：CMD-1257-2 Make is COMMAND MACHINARY With folding bed, special for drilling rig construction | |
| 39. Bladder Model ：CMD-1257-55 Make is COMMAND MACHINARY Capacity: 5m ⊃3; |
We can also customize.
Remarks:
1. The performance parameters in the table are theoretical reference data under the condition of driving on the good road surface, the actual data varies from actual working conditions and drivers’ driving habits.
2. For sake of product improvement and technical promotion, the vehicle parameters are subject to change without prior notice.
Warranty and Our advantage
Our Advantage
1.Competitive Factory Price and Excellent Quality
2.More than 20 years' experience as a manufacturer
3.Products Quality Certification SGS CCC ISO
4.Perfect after-sale service
5.Customized products available with us
6.Export to more than 50 countries and regions
7.Oversea wareshouse with more than 100000 US dollors spare parts in stock
8.Oversea office with more than 15 professional engineers to help local customers
Warranty
1. One year quality guarantee for three key parts axles, engine, transmission or within 100000km, which comes the first.
2. Other spare part could be supplied by OEM at cost prices.
3. Regularly callback to know the vehicle's working status.
4. Offer spare parts at factory cost and free technical support during the whole life cycle of the truck and trailers (say 10 years);
5.Special service team with technial engineers is ready if any quality complains, will respond in 48 hours with feedback and solution.
Our certificates
Our service
Main products
1. Tractor Truck, Cargo Truck, Dump Truck / Tipper Truck
2. Fire Fighting Truck / Fire Truck / Fire Vehicle / Fire Engine
3. Truck with crane / Truck mounted crane
4. Oil Tank Truck / Fuel Tanker Truck
5. Water truck / Water Tank Truck / Water Sprinkler Truck
6. Concrete Mixer Truck
7. Van truck / Insulated truck/ Refrigeration truck
8. Fecal suction truck / Sewage suction truck
9. Cement Powder Tank truck/ Bulk cement truck
10. High-altitude operation truck
11. Self-loading garbage truck, garbage compactor truck, sealed garbage truck,
12. Semi Trailer ( flat bed trailer / skeleton trailer / dump semi trailer / side wall trailer / low bed trailer / van container trailer / warehouse trailer, fuel tank semi trailer, etc. )
Company Introduction
SINOTRUK is one of the biggest heavy duty truck manufacturer in China, also the absolute No. 1 for exporting.
We manufacture HOWO tractor truck, dump truck, concrete mixer, tanker truck, flat bed semi trailer and other special trucks, etc....
Factory view
Packaging and Shipping
About the shipping, we SINOTRUK have rich experience in RORO, BULK CARGO, 40HQ, 40FR etc. Every year thousands of our trucks and trailers are sold to Myanmar, Tanzania, Zambia, Ethiopia, Nigeria, Australia, Russia and etc, they have gained great popularity and excellent feedback from our customers. We also export thousands of spare parts to different countries.
Welcome to visit our factory.