Product knowledge

• Precautions for Washing and Sweeping Truck

  (5) General precautions for washing and sweeping vehicles①. During operation, the operator shall not leave the operation cabinet in order to deal with unexpected accidents in time;②. During operation, use a pipe holder to feed the nozzle into the pipeline first, and then open the three-way valve, an

  Product knowledge January 06, 2022
• The Advantage of Light Cargo Truck

  The biggest advantages of light trucks are the large cargo compartment, strong power, good comfort, higher transportation efficiency, and stronger comprehensive capabilities.1. Those with more standard loads and certain requirements for cargo compartment volume, such as express delivery, supermarket

  Product knowledge January 05, 2022
• How to Maintain the Refueling Truck

  The maintenance of the mobile fuel truck includes the following. The chassis, engine, fuel pump, fuel dispenser, filter screen, fuel tank, piping system and safety valve of the mobile fuel truck should be maintained in accordance with the maintenance instructions and repair instructions of the truck

  Product knowledge January 01, 2022
• Brake Chamber

  The function of the brake air chamber is to convert the pressure of the compressed air into the mechanical force that makes the brake camshaft rotate to realize the braking action. The brake air chamber is a clamp clamp diaphragm type. The front and rear brake chambers are different in size, but the

  Product knowledge December 31, 2021
• The Tensioner.

  The tensioner is a belt-driven tensioning device. When the center distance of the belt cannot be adjusted, the tensioner can be used to tension the belt. The tension wheel is a follower wheel pressed on the belt to change the wrap angle of the belt wheel or to control the tension of the belt. It is

  Product knowledge December 30, 2021
• The Cylinder Head

  The function of the cylinder head is to seal the cylinder, form a combustion space with the piston, and withstand the action of high temperature and high pressure gas. The cylinder head bears the mechanical load caused by the gas force and the tightening of the cylinder bolts, and at the same time b

  Product knowledge December 29, 2021
• How to Make Semi Trailer Lighter?

  Reduce the thickness of the board. For this point, use the steel with the high marks. High-standard steel, high strength, good toughness, fatigue resistance 2. Reduce the weight of the rear axle. The axle and suspension are now close to two tons, only light axles, disc brakes, 4 leaf springs, new l

  Product knowledge December 24, 2021
• Tips for Semi-trailer

  a Check the tire pressure and adjust it to the level recommended by the tire manufacturer; b Check the tightness of the tire screws;c Check the brake system for air leakage and test whether it can brake; d Check the tightness of all nuts, screws and bolts of the suspension; e Check the brake connect

  Product knowledge December 22, 2021
• Safety Operation Regulations of Dump Semi-trailer

  1. It is strictly forbidden to modify the air circuit of the trailer privately before the trailer is used; when the new car is equipped with a welding water tank, the power of the tractor must be turned off; the tire pressure should be checked before the new car is used to avoid abnormal tire wear;

  Product knowledge December 20, 2021
• Dump Truck Maintenance Method Ⅱ

  4. Cleaning and maintenance of the dump truck gearbox (automatic transmission gearbox). Under normal circumstances, the dump truck is cleaned and maintained every 20,000km-25,000km, or when the gearbox slips, the water temperature is high, the shift is slow, or the system leaks. Clean and maintain o

  Product knowledge December 13, 2021