Aluminium Fuel Tank Trailer
Product Description
SINOTRUK Hubei Huawin Special Vehicle is professional factory to make fuel tank trailers, including the carbton steel tank, aluminum fuel tank.
More and more carbon steel tanker trailers are replaced by the aluminum fuel tank trailers, because of the less tare weight and higher safety standard.
The aluminum tank trailer tare weight is about 7tons while the carbon steel fuel tank trailer tare weight is about 11tons or more. This improved the transport efficiency largely.
The tank volume, compartments, shapes could be customized.
The tank parts could be nominated into different brands, China brand, or CIVOCAN or other brands.
A).DIMENSIONS | |
DESCRIPTION | DETAIL |
Tare weight | 7400kgs |
Total height | 3700mm |
Overall width | 2500mm |
Overall length | 12000mm |
B).TANK BODY | |
DESCRIPTION | DETAIL |
Shape | Elliptical or round or square round |
Total capacity（L） | 42,000+3% |
Compartment | 7 compartments |
Tank body material | Aluminium 5083 |
Top sheet thickness 6.00 mm | |
Side sheet thickness 6.00 mm | |
The baffles thickness 7.2 mm | |
End plate | Thickness 7.2 mm |
Roll Over Coaming | Full length double extrusion U shape coaming for anti-fall protection. Top of the roll over coaming is at least 50mm above any fittings on the tank. |
Working temperature | 20~50 °C operating temperatures |
Tank shell condition | Free of crakes, defective welding, serious dents and corrosion. Water pressure test will be done after tank shell finished. X-Ray test will be done on 10% of the circumstance welding and longitude welding. T joint welding and butt welding are 100% scanned by X-Ray. |
C). TANK FITINGS AND PIPING | |
Manhole cover | Jialong C801A-460 16” manhole cover with PV vent, overfill holes and vapour transfer vent hole, lockable |
Pressure vacuum vent | Roll-over type incorporates with manhole cover. |
Vapor valve | Jialong C802D-80 3” mounted in each compartment |
Vapor recovery system | Jialong C802B-80 3”at outside rear of combing; vapor adaptor Jialong C803A-100 4”,4” aluminium internal vapor recovery line through the tank to API area |
Discharging valve | API adaptors Jialong C806C-100, 4”, with dust cap |
Piping | 4”alu discharge pipes with minimum number of bends |
Emergency valve | Pneumatic control emergency valve, Jialong C804AQ 4” |
Emergency cut off switch | 2pcs emergency cut off switch |
Overfill system | Jialong CFY01 overfill optic sensor with 5 wires optic socket CFY02 located API area |
Antistatic cable | ¼”anit-static stainless steel cable in each compartment |
Brake interlock system | Interlock equipment:1.Control box;2.API box;3.Handrail; The truck can not move if all above equipments are in working condition |
Lights | All LED lights 24V system |
D). Chassis DETAIL | |
Main beams material | Aluminum 6061 chassis I beam |
Axle | 3 axles |
“FUWA” 13 Tons 1820mm/ABS;drum brake | |
Brake lining 420x180mm | |
10 Stud | |
Landing Gear | JOST brand E200 Two-speed, manual operating, heavy duty landing gear |
King Pin | JOST brand 50# 2” bolt-in king pin |
Suspension | FUWA Air Suspension system and air bag |
Braking System | “WABCO”ABS 4S/2M ;T30/30+T30 Spring brake chamber. |
Wheel rim | 9.0-22.5 steel wheel rim |
Tire | China Brand Triangle 12R22.5 tubeless tire with one spare tire |
Painting | No painting |
E). ACCESSORIES | |
Ladder | Aluminium ladder located at rear side of the tank |
Walkway | Anti-skid aluminium walk way |
Tool cabinet | 1pc aluminium tool cabinet |
Fenders | Aluminum rear fender for 3 axles |
Safety equipment | 2pcs 10kg ABC type fire extinguisher b).4 x 80cm traffic cones with holder c).2 x plastic chock blocks with holder d).1 x manual rewire static cable reel e).1 x 6 m length brass grounding cable w/box on rear left of bumper |
Warranty | 1 year warranty or 80000km which ever comes first, for the tank body, running gear and tank parts. Easy wearing parts like lights and rubbers are not in the range of warranty |
Document | a) Drawing b) Manual and maintenance book c) Weight distribution |